Fiberglass Mesh 5x7mm 120gr/m2

Fiberglass mesh is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of Acrylic Emulsion by two components Hard & Soft. Fiberglass mesh with the weight of 120 gr/m2 is a significant element in the isolation system, being used as a reinforcing element for surfaces with a thin layer of plaster.

Fiberglass Mesh with the weight of 120g/m2 is used as a reinforcing element for interior and exterior plasters, protecting them from cracking; It is used in manufacture of reinforcement layers for facades renovations.

POSSIBLE RISKS, PREVENTION REQUIREMENTS

Fiberglass mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, the fiberglass mesh does not require the safety data sheet.

SPECIFIC CONDITIONS, STORAGE, TRANSPORTATION

Specific condition: It is not recommended to be stored in clean, dry places, at temperatures between -5°C and 30°C, protected from the direct radiation of any heat source or from the direct action of the sun’s rays;

Transportation: The rolls of fiberglass mesh, positioned vertically on pallets, are being transported with adequate and covered transportation.

Storage: To be stored in rolls positioned vertically, in covered and appropriate storages.