Fiberglass mesh
Pozharan
Fiberglass mesh is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of Acrylic Emulsion by two components Hard & Soft. Fiberglass mesh with the weight of 150 gr/m2 is a significant element in the isolation system, being used as a reinforcing element for surfaces with a thin layer of plaster.
Fiberglass mesh with the weight of 150 g/m2 is used as reinforcing element for interior and exterior plasters, protecting them from cracking; It is used in manufacture of reinforcement layers for facades renovations.
POSSIBLE RISKS, REVENTION REQUIREMENTS
Fiberglass Mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, fiberglass reinforcement does not require the safety data sheet.
STORAGE, SPECIFIC CONDITIONS, TRANSPORTATION
Specific condition: it is recommended to be stored in clean, dry places, at temperatures between -5°C and 30°C , protected from the direct radiation of any heat source or from the direct action of the sun’s rays;
Transportation: the rolls of fiberglass mesh, positioned vertically on pallets, are being transported with adequate and covered transportation. Storage: to be stored in rolls positioned vertically, should not having side pressure.