Fiberglass Mesh 5x4mm 160gr/m2

Fiberglass mesh E-glass type , is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of SBR (Styrene-Butadiene). Using a LENO-type fabric, the fiberglass mesh with the weight of 160 g/m2 confers resistance to the wall rendering and a lifetime equal to that of the plasters.

From 160gr/m2 we have available Classic and Premium Mesh, Classic comes in White, Premium depends in color, or logo print as customers requirements.

Fiberglass Mesh of the weight 160 g/m2 is used as reinforcing element for external thermal insulation system (ETICS) based on expanded polystyrene, mineral wool or other type of thermal insulation board; Manufacture of reinforcement layers for facades renovations. Reinforcement of interior and exterior plasters, protecting them from cracking;

POSSIBLE RISKS, REVENTION REQUIREMENTS

Fiberglass Mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, fiberglass reinforcement does not require the safety data sheet.

STORAGE, SPECIFIC CONDITIONS, TRANSPORTATION

Specific condition: it is recommended to be stored in clean, dry places, at temperatures between -5°C and 30°C , protected from the direct radiation of any heat source or from the direct action of the sun’s rays;

Transportation: the rolls of fiberglass mesh, positioned vertically on pallets, are being transported with adequate and covered transportation. Storage: to be stored in rolls positioned vertically, should not having side pressure.